Skip to main content

SWaP patch

  1. Make sure you have installed the latest version of the toolbox from here: https://github.com/olli991/mib-std2-pq-zr-toolbox.
info

Details about Technisat MIB STD2 Toolbox installation.

  1. Make sure that Toolbox SD card is inserted into SD1 port. It's required for origian files backup before patching.
  2. Press and hold MENU button for 10 seconds to enter Testmode menue.
  3. Go to Green Engineering Menu → mibstd2_toolbox → Tools → Patch tsd.mibstd2.system.swap and generate EL.
  4. Wait about 15 seconds for the script to perform modifications.
  5. Press and hold volume control knob for 10 seconds to reboot the unit.
  6. Check if FEC/SWaP protected features are working.

https://youtu.be/a9uwYmBPc1Q

info

MIB STD2 Toolbox SWaP Patching supports most common firmwares. If your firmware is not supported, report it in the repository or update firmware to the most recent/supported version.

info

Performance Monitor will not be enabled by this method. You will need to upload self-generated FEC/SWaP code. More details:

MIB FEC/SWaP Code Generator

[5F - Inserting FECs with OBDeleven](/MQB CODING/5F - Inserting FECs with OBDeleven/)